C189 Be Careful Qin Guan will Break the Bridge after Crossing the River
C189 Be Careful Qin Guan will Break the Bridge after Crossing the River
"But, what else can I do after leaving the factory?" Zhang Xiangyang continued to plead, "I have worked here for more than 20 years. I won't do anything else!"
It was all because of that detestable Qin Guan. Otherwise, he would be the deputy director now! All of this was his fault!
Now, he was pleading for mercy. If these people continued to be perfunctory to him, Zhang Xiangyang would also bring out the words he had prepared beforehand.
Look, it's only the beginning for Qin Guan to push me away. Qin Guan will continue to push you away one by one. Qin Guan's ultimate goal is to be the director of the factory!
Since he was going to leave, it was only right for him to leave some vicious words behind. Furthermore, his words will definitely come true. Look at now. Qin Guan was constantly promoting new people. He wanted to push all of us old guys away. Let's see if you regret your decision the day you are squeezed away!
Fortunately, things did not get to this point. Vice Factory Manager Wang said, "Zhang, right now, the country's reform is very strong. You can take a loan from the bank and open your own machinery factory."
"Then what do I produce?" Zhang Xiangyang said.
"It can produce the parts that our products need." Vice Factory Manager Wang said, "Our factory needs to produce tens of thousands or even hundreds of thousands of RMB annually. Even if you only produce a small part of it, the profit is still not bad. With our relationship, the components that you produce, are you afraid that they will not be purchased? "
A heavy card and tens of thousands of components. It is impossible for all the components to be produced by themselves. It must be purchased from the supplier downstream. Vice Factory Manager Wang's words were actually from Qin Guan's words to appease the workers.
With Qin Guan around, no matter what problem it was, it could be solved. He handled this kind of conflict with ease.
Since Qin Guan said that there would be a private machinery processing factory in the future, Zhang Xiangyang could open it. The parts produced would be supplied to his side. Wouldn't that be good?
Hearing Vice Factory Manager Wang say so, Zhang Xiangyang gritted his teeth. "Okay, I'll try. Factory Manager Wang, thank you for your guidance. Factory Manager Suen, before leaving, I will remind you again. You trust and rely on Qin Guan so much now. Be careful that Qin Guan will break the bridge after crossing the river. "
After saying that, Zhang Xiangyang walked out with large strides.
Breaking down the bridge after crossing the river? Hearing Zhang Xiangyang's words, Factory Manager Suen also smiled bitterly. Actually, he couldn't keep up with the development of the situation. His position... If he gave it to Qin Guan, it would definitely be beneficial to the factory. He was afraid that Qin Guan wouldn't like it!
People like Qin Guan would fight for it everywhere. It was their own fortune that Qin Guan was able to stay in Factory 4447. This Zhang Xiangyang still couldn't understand Qin Guan's potential!
After Zhang Xiangyang left, Factory Manager Suen and Vice Factory Manager Wang said, "Now, the new machine tools in the factory are a big deal. We need to hire specialized operators. The most important thing for us, Wang, is that you can't make it. Just make a trip. When the time comes, with the machine tools, there will be no familiar workmanship. That won't do either! "
Now, the higher-ups of the factory had reached such a consensus. The factory was producing heavy trucks, and now, the only thing left was to stop them.
In order to produce high-precision high-pressure oil pump, high-precision processing machines had to be introduced, as well as special talents to operate the machine.
Qin Guan was responsible for the introduction of the machine tools.
The night slowly deepened. In the research and development workshop, which was also the same workshop as Qin Guan's, Qin Guan was alone, looking at the machine in front of him.
A few old lathes.
These were the lathes that came from that war era. They had once produced weapons and ammunition for the frontlines. And then... It had worked in Factory 4447 for many years without any complaints. He was like a hard-working yellow cow. The paint on the machine had long been mottled. The various buttons used to operate the machine tools had already been polished until they were shiny.
Now, it was completely on the verge of being scrapped, especially when there was a problem with its brake system. The processed parts could not be stopped in time, and many parts could only watch helplessly as they were scrapped.
Now, these few abandoned lathes had finally reached the point where the residual heat was released.
In addition to the lathes, there were also a few worn radios, which were found for insurance.
According to the principle of equal exchange, if he wanted to use ordinary lathes to exchange for Cnc Machine Tool, then he still lacked the electronic control part. He hoped that the electronic parts on these radios could satisfy the principle of equal value.
Qin Guan stood quietly and looked at the things in front of him. At this moment, time seemed to have stopped once again.
Qin Guan entered the system in his brain.
The Weapon Exchange System also began to divide out some details, such as the exchange of information on weapons, the exchange of weapons processing machinery, and the exchange of machine tools.
There were still some grey projects at the back. It seemed that as the system was unlocked, more and more powerful functions would appear.
Qin Guan could not wait any longer.
Lathe graveyard!
In Weapon Graveyard, Qin Guan had already walked a lot. However, this was the first time he had walked through a lathe graveyard.
In fact, there were many machine tools cemeteries all over the world. Usually, they were all abandoned metal factories.
The machine tools, even if it was the advanced Cnc Machine Tool of the future generations, were still made of iron. As for the circuit boards, they might have been advanced at that time. However, after a few years, they had already fallen behind. After all, electronic technology was changing too quickly.
In the 2020 cemetery, there was already a large number of domestic Cnc Machine Tool. After all, in the future, the Cnc Machine Tool was not some high-tech technology. The high-tech ones were multi-axis. For example, the terrifying 32-axis linkage, all kinds of complicated curved surfaces. It could be perfectly processed.
Domestic ones were still some low-end ones. Fortunately, Qin Guan's requirements were not high. He only needed to work on a three-axis linkage. Processing high-pressure oil pump looked very advanced now, but in the future, it was nothing.
Moreover, there was another advantage of using domestic lathes. It was to avoid suspicion. All the nameplates on them were domestic. They were not imported from overseas and did not cost the country's foreign exchange reserves. It was easy to fool them.
Yongchuan.
This was an ordinary place in Han Country, and it was not ordinary. It belonged to the machine tool production center of Han Country, and it gathered a large number of domestic and international machine bed factories.
At the same time, in an inconspicuous place in Yongchuan, the largest machine tool cemetery in the country appeared. There were a large number of lathes that were lagging behind, waiting to be eliminated.
Qin Guan stood in the machine tool cemetery. If he had just entered the tank cemetery before, it would have been the same as the plane cemetery, and he would have been excited.